In most cases, especially on NP, the oxides are to be removed using min. 110µm
aluminus oxide. (Refer to manufacturers manuals!)
A clean and grease-free surface must be present.
Classic
|
|
Process alloys according to manufacturers instructions. Avoid sharp edges. Unless specified otherwise, the alloy should be sandblasted with min. 110µm ALOX at 2 Bar. |
|
|
In most cases, especially on NP, the oxides are to be removed using min. 110µm
aluminus oxide. (Refer to manufacturers manuals!)
|
|
|
A uniform oxide layer is desired. |